亚洲经典在线,男女那个视频,国产成人av综合久久

BYD reach forklift maintenance and operation process video -

After starting the electric transport truck normally, press the handle of the electric transport truck with both hands to between 90° and 180°

Forklift

We will develop intelligent Internet of Things solutions (IIOT) for intelligent warehousing and logistics systems, realize digital intelligent maintenance and data collection through the application of intelligent hardware equipment and digital products, and apply a unified data management platform and energy consumption analysis system to improve productivity and improve the efficiency of customer machines Electric transport trucks are time-saving, labor-saving, cost-saving, and highly efficient

Prevent such accidents from happening again! 1

4 Electric forklifts are also good in terms of driving convenience, but attention should also be paid to maintenance after long-term use

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

Usually pay attention to the following points: 1

③After charging is completed, turn off the power supply and charger, and then unplug the charger Although the diesel engine of an internal combustion forklift is more reliable and powerful, the cost of diesel is high, and the exhaust emissions can easily pollute the environment; the cost of electric forklifts is much lower than that of other fuels, and there is no exhaust and low noise, which meets the environmental protection requirements advocated by the country

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

This means that electric forklift manufacturers can obtain more energy and greater braking torque in actual use to achieve the purpose of speed operation

This is the second basic law of thermal science

The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits

BYD reach forklift maintenance and operation process video -0 tons, and is generally used for outdoor operations in docks, steel and other industries with heavy cargo

Precautions for using electric forklifts in warehouses 1

The following is shared by the editor of new energy forklifts: As one of the important products of electric forklifts, the sales volume of reach stackers is increasing year by year

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise

Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading

The vehicle has a compact body, flexible movement, and light weight, which is a must-have in warehouses now

Electric forklift technology has gradually matured, and the domestic electric forklift industry has great development potential Applicable to various workplaces: such as factory workshops, docks, warehouses and other places for cargo loading and unloading From the above we can see that it is not difficult to find the cause of the abnormal noise of the electric pallet truck, but it requires the driver to have enough patience to solve it

DC motor drive As a relatively cheap driving method, DC drive has been widely used in electric equipment for a long time, but it has some inherent defects in performance and maintenance

Paper tube pallet truck is used for transporting warp beams of water jet looms, and can also be used for transporting paper tubes and paper rolls

They have the advantages of labor saving, energy saving, environmental protection, high efficiency, safety and reliability, and low noise

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have promoted the scope of use and application of BYD forklifts

BYD reach forklift maintenance and operation process video -

(2) When a forklift encounters an obstacle, it should not force its way through

2 From raw materials, to lithium batteries, module structure, to the overall manufacturing process, and final marketing, it can be said that BYD enjoys its own competitive advantage in every step

Say goodbye to the traditional camera that needs to be connected to the power cord, and you no longer have to worry about lifting and twisting the wire

Parking (1) Release the direction select switch

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

Forklifts equipped with high-performance compact electric drive axles can increase the battery capacity by 40% without changing the volume of the entire vehicle, so as to meet customers' higher performance requirements

Try to turn it slowly

Stable and reliable

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info