国产清纯白嫩初高生在线,欧美激情伊人,手机看片91

BYD electric forklift lithium battery maintenance- Adjust the height of the forks of the electric hydraulic truck so that the forks can be inserted into the pallet as far as possible

Tilt the joystick to tilt the mast backward to prevent the cargo from falling while the electric forklift is driving

Instrumentation The power meter displays the power value when working normally, reflecting whether the battery power meets the requirements Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

Freight is also very convenient, the body is agile, and most importantly, it is very environmentally friendly

It is also an indispensable tool for our warehouses in recent years

Fault 3: Slow lifting speed or failure to lift Generally, it is because the oil tank is low in oil, and hydraulic oil needs to be added in time or replaced directly

Advantages of unmanned forklifts With the improvement of my country's intelligent technology, my country's intelligent control system can also dispatch hundreds of unmanned forklifts at the same time Instead, it can turn the operating arm to move forward or backward to bypass the obstacle Through the application of unmanned forklift, we can realize the handling of heavy goods, effectively speed up work efficiency, and well solve the problems of increasing the amount of logistics information and the high intensity of labor relations in manual handling in my country's industrial production

Car body The body and frame of the forklift are integrated into one body and are made of profiled steel with resist welding

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

The battery fluid should be supplemented with distilled water in time

BYD electric forklift lithium battery maintenance- The net height in the container is required to be less than 2

There is a tortoise and rabbit regulator on the handle, and the tortoise speed and rabbit speed can be switched freely

(3) After unloading, the forks should be lowered to the normal driving position before driving Rotate the travel button one after another to move the electric pallet truck backward The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time Below, the BYD forklift editor will tell you how to operate a BYD forklift

The requirements of the logistics industry for the forklift industry are high strength, long service time, large load, stable performance, high degree of automation and intelligence, and low noise

If it is higher than the standard value, it indicates that the charging voltage is too high

lead-acid), so no parameters need to be changed to manage the battery

Considering the accuracy and flexibility of forklift operation, a side shifter is required

They rely on human transportation and handle operation, which is simple and flexible, environmentally friendly and energy-saving

When entering or leaving the work site or driving, pay attention to whether there are obstacles above

BYD electric forklift lithium battery maintenance- Abstract: In order to reduce the width of the stacking channel and improve the storage capacity and storage efficiency, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift

The reach truck is similar to the leg-type forklift in that the center of gravity of the goods falls within the support plane of the vehicle, so it has good stability

It integrates power, braking, differential, and load-bearing in one, and has speed, temperature and other sensor interfaces, which is more conducive to intelligent control

Their electric steering system, acceleration control system, hydraulic control system and brake system are all controlled by electrical signals, which greatly improves work efficiency and reduces the labor intensity of operators

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

Common tonnages of manual trucks are 2 tons/2 The cargo unit can be enlarged to save transportation time

FJ AC electric control of Fanji Technology is the only mature national brand that has been used in batches in the market for more than 4 years

Turn the accelerator forward to move the forklift forward, turn the accelerator backward to move backward, and return the accelerator to the middle position to stop More environmentally friendly, no corrosion, lead-free, safe to use, and can be recycled even when its service life is up It involves a complete set of system matching and technical support

The minimum turning radius is crucial for calculating the width of the channel that the electric forklift can pass through

Here we introduce to you a counterbalanced forklift AGV independently developed and produced

How to prevent corrosion and rust of new energy forklifts? Anti-corrosion and anti-rust are extremely important for the maintenance and upkeep of machinery

In this case, the forklift must have good anti-slip capabilities

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info