五月天婷婷在线播放,国产一级片精品,色婷婷五月综合色啪网

BYD electric reach forklift top ten rankings-

(CATL)

It is suitable for use in small spaces

The unmanned forklift moves to the loading point by moving straight, sideways, turning, etc

This is just pallet handling (plane movement) It can transform static cargo into dynamic cargo and is a kind of movable "ground" 6

8T, 2T, 2

Electric pallet trucks have the advantages of energy saving, no exhaust emissions, and low noise

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Avoid overloading or partial loading of goods

Check whether the emergency cut-off switch of the electric pallet truck is turned off

BYD electric reach forklift top ten rankings- This is mainly due to the high proportion of self-produced parts

There is no need to replace easily damaged electronic parts, so electric forklifts are more economical

When the solenoid, manual reversing valve, or one-way valve is blocked by waste or the sealing ring is worn, causing internal leakage in the equipment, the valve components must be cleaned and the worn seals replaced in time during daily use

Full Chinese display surface: The technologically advanced Chinese display surface on the screen can display the operating status of vehicles in real time, provide vehicle fault alarms and prompts, and the intelligent system can provide accurate real-time information for operation and maintenance personnel, maintaining personalized operation effects

It is reported that Zhengzhou Jiachen is a professional enterprise that conducts research and development, design, production and manufacturing of new energy vehicle control systems and related products

It is widely used in petroleum, chemical, coal, metallurgy, transportation, shipbuilding and other industries

When putting down the load, the mast can be tilted forward slightly to facilitate placing the load and pulling out the fork

Anhui Yufeng Warehouse Electric Transporter Product Advantages: ?Electronic control, controller with multiple automatic protection systems

After lifting the goods, it is strictly forbidden to stand under the fork; 8

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

If you don’t know much about Chinese forklifts, you can refer to the manufacturer’s strength, user reviews, qualifications, etc

During peak hours, a large number of trucks are waiting in line for loading and unloading operations

② Raise the fork to the top position to check whether the hydraulic oil in the hydraulic system is sufficient

BYD electric reach forklift top ten rankings-

What drivers need to learn and understand most now is the maintenance and care of electric transport trucks

Only when all the equipment of the electric flatbed truck is functioning normally can the flatbed truck be operated

There is a tortoise and rabbit adjuster on the handle, and the tortoise speed and rabbit speed can be switched freely

The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius

There are three main reasons for this problem

The cost of using explosion-proof electric transport vehicles is more than 20% less than that of pure manual transportation

There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

Otherwise, it is easy to damage the ground and forklift wheels, and it will cause accidents such as cargo collapse, damage to buildings and injuries to personnel

Factory operators are basically able to operate the equipment skillfully, but rarely can they solve the faults in the use of the equipment in a timely manner

BYD forklift provides a long 5-year warranty period for rechargeable batteries

When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4 What are the main considerations when choosing a pallet for an electric transport truck? We first need to consider the specifications and dimensions of the goods, such as the size of the outer packaging of the goods, the way it is placed on the pallet, and the weight and height of the goods

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info