午夜大片男女免费观看爽爽爽尤物 ,www一区二区乱码www,成人做爰视频www网站小优视频

BYD pure electric forklift charging flow chart -

Full AC control system 5

2M and 1

Considering that there may be cylindrical goods, large cotton bales and other goods in the warehouse that need to be handled, it is necessary to add attachments such as grippers, and also consider whether hydraulic pipelines are reserved when the forklift leaves the factory

The reach truck has a small lifting capacity and is driven by an electric motor

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

Before lifting the forklift, make sure that the forklift has completely penetrated the bottom of the pallet

At present, companies such as Hangcha Group and Noli have launched unmanned and intelligent products, and have achieved good market applications 2

Energy saving and safety

When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible

, Hangcha Group Co

Electric transport trucks are no exception

The altitude shall not exceed 1,200 meters

The minimum turning radius refers to the minimum distance from the outermost and innermost sides of the vehicle body to the center of the turn when the electric forklift is unloaded, driving at a low speed, and turning the steering wheel fully

Electric pallet trucks are the main handling tools in warehousing and logistics

BYD pure electric forklift charging flow chart -

However, the voltage rises very quickly, the electrolyte boiling phenomenon occurs earlier than normal batteries, and the charging time is greatly shortened

Maintenance-free: no need to add water, no dripping, corrosion and other environmental pollution

No harm to people and goods

The driver has to stretch his neck to barely find the correct position based on experience! If it is not accurate, the goods will tip over Start Please follow the following steps, otherwise the electric pallet truck will not operate: (1) Make sure the power socket is firmly plugged in

The following is shared by BYD forklift editor: 1

5 meters

With the same brushless all-AC motor, maintenance-free AC front drive, lead-acid battery/lithium battery, the price of a 2-ton ride-on forklift is only about RMB 50,000

It manifests itself as sediment in the electrolyte, and brown material will rise from the bottom of the electrolyte during charging

0 tons, and the width of the working channel is generally 3

The product used in this solution is the 610X in the 600 series wheel drive planetary gearbox, which best meets customer needs and can be connected to high power density electric motors 5Minimum turning radius There are mainly two types of electric transport trucks on the market: semi-electric and fully electric

The only variable is the minimum turning radius of the forklift, which is a value that companies need to pay special attention to

BYD pure electric forklift charging flow chart -0 tons, and is generally divided into empty container forklifts, loaded container forklifts, and container reach stackers 4 If necessary, add 45# hydraulic oil

Although its price is relatively expensive in the short term, the maintenance cost is lower than that of diesel forklifts, and the maintenance cycle is two to three times that of diesel forklifts

When distributed to each manufacturer, diesel forklifts can be mass-produced, and the price is naturally very low, while battery forklifts are difficult to mass-produce

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Electric transport trucks are time-saving, labor-saving, cost-saving, and highly efficient

If you want to buy a cost-effective electric transporter with low price, good quality and good service, you should first refer to the production strength of the manufacturer

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

Before starting work every day, check the following safety features: ※ The speaker functions normally

When the electric transport truck is not in use, put the forks away and store them in a designated location without affecting other operations

Before working every day, you should first check the following safety features: ※ The speaker functions normally

It can effectively prevent the occurrence of fire and explosion and other dangerous situations in explosion-proof environment, so as to ensure the safety of use in explosion-proof environment

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info