久久久全国免费视频,成人av免费看,精品久久久久中文字幕日本

BYD warehouse forklift maintenance and operation flow chart - Overall design of product structure The overall design of the product structure is carried out according to the modular concept, mainly considering three aspects: cargo lifting, cargo forks, and vehicle chassis: Cargo lifting: To facilitate the expansion of the lifting height in the future and reduce the center height of the vehicle, this unmanned forklift uses a telescopic gantry to achieve the lifting and lowering of the cargo platform

The lifting and driving of electric hydraulic trucks are achieved through the power of batteries to drive the wheels to move forward and turn

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

They are often used for transporting large objects in warehouses, usually powered by fuel engines or batteries, and some forklifts are manually hydraulically operated

"Cobalt-free" and "low lithium content" achieve the environmental compatibility of the battery and greatly reduce the cost of waste disposal

Electric forklifts are mainly used for self-handling and stacking operations in warehouses

For example, lithium batteries may leak or even explode if used improperly

At the same time, because electrical components are often contaminated with water vapor, short circuits, leakage and other accidents are prone to occur Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius

On the contrary, the market demand for environmentally friendly Foshan forklifts will inevitably increase year by year

Plug in the battery

BYD warehouse forklift maintenance and operation flow chart -

The cost of using explosion-proof electric transport vehicles is more than 20% less than that of pure manual transportation

After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height

Electric forklifts are also good in terms of driving convenience, but attention should also be paid to maintenance after long-term use

Fast charging speed, it can be charged in 1-3 hours, which can save time for enterprises

Only personnel who are 18 years of age or older and have received special training can use this counterbalanced forklift

It takes a certain amount of time to load and unload goods, and it consumes manpower, is inefficient, and prolongs its usage time

It is not allowed to lift the cargo to more than 30cm for long-distance travel; 9

It can effectively prevent the occurrence of fire and explosion and other dangerous situations in explosion-proof environment, so as to ensure the safety of use in explosion-proof environment

Key switch The function of this switch is to control the connection and disconnection of the circuit

Therefore, lithium battery forklifts have many advantages

The following table shows the relevant parameters of the electric pallet trucks: Main components: 1

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design 4

(9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

Avoid using in blind areas; 9

BYD warehouse forklift maintenance and operation flow chart -

Solution Design 1

The application scenario guarantees the confidence of the product

Batteries are used as the driving force for electric forklifts

Cause of the accident: Construction team leader Xu violated the company's "Special Operations Safety Production Management System" and arranged for workers who were not qualified to drive a forklift to drive a forklift to carry out operations in violation of regulations 3 Internal combustion forklift vs electric forklift Electric forklifts are electrically driven Under the same battery capacity, the communication system will last longer; currently, most of the equipment used in logistics distribution centers, warehouses, workshops, etc

It is an indispensable component in power and energy storage batteries

Since fuel is easy to refuel, they can achieve long-term continuous operation and are capable of working in harsh environments

After starting the electric transport truck normally, press the handle of the electric transport truck with both hands to between 90° and 180°

But do you know how to choose the equipment that suits you? Next, the electric forklift manufacturer will lead you to understand how to choose a 3-ton electric forklift (20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

In addition, there are also types such as hydraulic transporters and micro-diamond transporters

However, this data generally has a deviation of 100mm, so it is recommended that companies add 100mm when calculating

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info