国产精品毛片无码,亚洲午夜爱爱香蕉片,欧美日韩高清免费

BYD new lithium battery forklift phone number-

For three-dimensional storage based on unmanned forklifts, the safety inspection is mainly considered from two aspects: the vehicle body itself and the loading device connected to the vehicle body

Cause: The charger operating voltage is out of regulation or faulty Check cooling water and engine oil; 2

Compared with internal combustion forklifts, it is closer to the violation we are advocating now, and the noise is also very small

Compared with internal combustion forklifts, they have the advantages of no pollution, easy operation, energy saving and high efficiency

If relevant companies want to truly get involved in this field, they must break through some technical bottlenecks, such as battery consistency and power management system (BMS) matching

The weld height should not exceed 1-2mm above the substrate plane

With the development of the economy and the improvement of environmental protection and energy-saving requirements, electric forklifts are developing rapidly

0 tons, and the width of the working channel is generally 3

(7) When a forklift is operating, no one is allowed to stand on the forks

Check and adjust the battery sulfuric acid ratio, clean the battery surface, and tighten the battery terminals Gasoline forklift: 1-7 tons, including single fuel and dual fuel warn! Do not operate a forklift with serious functional defects that endanger safety

BYD new lithium battery forklift phone number- On the basis of primer spraying, the iron plate of the body can be sprayed with a low-temperature rust-resistant protective layer to cope with the huge temperature difference in the storage operation 3

Slowly accelerate to the ideal speed

Forklifts are special equipment used in industrial and logistics warehouses

, Ltd

Environmental protection, hygiene and high safety: The shell material is made of ABS engineering plastic or aluminum alloy, which meets the requirements of EU ROHS standards

Electric transport truck manufacturers remind everyone that the motor, battery and other important parts of the electric transport truck must be checked regularly Forklift

Since fuel is easy to refuel, they can achieve long-term continuous operation and are capable of working in harsh environments

Turn the accelerator forward to move the forklift forward, turn the accelerator backward to move backward, and return the accelerator to the middle position to stop

If it is lower than the bottom of the distilled water bottle, add water

Internal combustion forklift Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

However, the disadvantage of manual pallet trucks is that they are time-consuming and labor-intensive, and their work efficiency is lower than that of electric pallet trucks Check and adjust the battery sulfuric acid ratio, clean the battery surface, and tighten the battery terminals (9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

BYD new lithium battery forklift phone number-

The following subdivided industry application scenarios will help you understand the technical advantages of BYD's new energy forklifts

Forklift operator certificate: Article 38 of the Regulations on Safety Supervision of Special Equipment states: "Operators and relevant management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles within the site (factory) shall be qualified by the special equipment safety supervision and management department in accordance with relevant national regulations and obtain a special operation personnel certificate in a unified national format before they can engage in corresponding operations or management work 2

The market share of manual trucks and internal combustion forklifts has gradually declined

The above is the editor's compilation of common fault troubleshooting methods for electric transport trucks

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

If the DC contactor of the equipment is insensitive, replace it in time

Among them, safety is the key factor that enterprises pay attention to

Fork: To improve the efficiency of cargo storage and retrieval and reduce the width of the storage channel, this unmanned forklift is designed with a two-way telescopic fork to complete the cargo placement and retrieval by sideways fork entry

The forks of the counterbalanced forklift are outside the centerline of the front wheels

Portable electric forklifts are mainly designed for handling goods in warehouses Not charging Phenomenon: When the electric stacker is charging normally, the charger light does not turn red, indicating that the battery is not charging

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info