国产三级精品三级在专区,又粗又猛又爽黄老大爷视频,国产白丝精品爽爽久久蜜臀

BYD Pallet Truck Maintenance Company -

It is not allowed to stand on the fork or pallet to work

Considering that the forklift needs to enter the container for operation, the height of the forklift mast is also considered

Lifting structure The lifting structure is mainly composed of a gantry and a fork

Overloading is not allowed; 5

(8) When operating, forklifts must comply with factory traffic regulations and maintain a certain safe distance from the vehicle in front

Low maintenance cost: 1-year warranty for the whole vehicle, free repair within 1 year, and replacement with a new vehicle within 3 months; 8

It is forbidden to park the counterbalanced forklift in the moving area, and it is strictly forbidden to stand on the forks or pallets of the counterbalanced electric forklift

At the same time, manufacturers are encouraged to actively promote product upgrades and install safety monitoring devices in advance

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

When the gear is adjusted to the tortoise speed, the speed of the battery truck will be limited, and it will not be too fast when accelerating

A heater should be installed in the cab

Second-hand products cannot be guaranteed, so we need to make a careful comparison before purchasing to avoid pitfalls

Then some people ask, why do we still use electric pallet trucks when there are electric forklifts? In fact, this is just like what we usually use

BYD Pallet Truck Maintenance Company -

0 meters

's FJ-D1 high-efficiency AC controller and M1 smart instrument components, and Zhengzhou Jiachen Electric Co

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

As the cost of unmanned forklifts decreases year by year and the system functions improve year by year, this type of narrow-aisle storage unmanned forklift will be more popular in the scene with high requirements for storage efficiency and storage capacity

Solution to hydraulic synchronization problem In order to effectively improve the structural rigidity during high-position lifting, this lifting device is designed with two sets of telescopic masts, involving 4 oil cylinders

In summary, the unmanned forklift can be divided into the front box, rear box, front lifting frame, rear lifting frame, two-way telescopic fork, safety edge contact, laser navigation, control panel, laser obstacle avoidance, power chassis, hydraulic system, power supply system, safety detection system, etc

Because of the obvious advantages, forklift trucks are now being deployed one after another, and hydrogen fuel cell forklifts will definitely be the main direction of forklift transformation in the future

Check the reversing lights; 6

There are three operating modes: walking, standing and riding

At present, green and low-carbon transformation has become a major trend of global development

When the vehicle is trudging, do not mistake the "Trudge" and "Evacuate" direction buttons for the turn buttons; 6

The fully electric transporter does not require manpower and can be driven by walking or standing Now we are promoting environmental protection everywhere

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

At the same time, in order to enhance the driver's sense of security during use, guardrails, intelligent recognition functions of pedal positions and three-speed design protection are specially installed to improve driving safety from multiple dimensions

BYD Pallet Truck Maintenance Company - Due to the size, the design of the entire car is less playable; 2 In simple terms, lifting and moving are all achieved by electric drive Through the application of increasingly powerful and constantly upgraded on-board computer hardware and software, electric forklifts have been able to achieve functions such as automatic guidance, automatic driving, optimized routes, automatic operations, vehicle scheduling, safe collision avoidance, automatic wireless charging, and automatic diagnosis The fast-paced lifestyle and work mode have changed people's consumption patterns If you add stackers in three dimensions, different heights, gantry structures, legs, legs, forward movement, etc It is not allowed to lift the cargo to more than 30cm for long-distance travel; 9

The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3

Check the lighting signal system and replace bulbs and fuses if necessary

After stopping using the electric pallet truck, turn off the key switch and remove the key

Parking (1) Release the direction select switch

As for which truck to choose, companies need to make a purchase based on their actual work

You only need to find the right position to fix it

(5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info