婷婷四房色播,啪啪福利社,欧美日韩在手机线旡码可下载

BYD ECB100 Warehouse forklifts Website

When in use, a buffer zone should be built between the cold storage and the charging and loading and unloading areas

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

Manual transport trucks are mainly used to transport pallets or directly transport goods

The controller self-diagnosis system displays the fault code through the handheld unit, making it more convenient to solve the fault

5 meters

It takes a certain amount of time to load and unload goods, and it consumes manpower, is inefficient, and prolongs its usage time It is forbidden to park the counterbalanced forklift in the moving area, and it is strictly forbidden to stand on the forks or pallets of the counterbalanced electric forklift

They are the best choice for weighing goods moving over short distances

The technical parameters of a forklift are used to indicate the structural characteristics and working performance of the forklift

In addition, the company is in a period of rapid growth and needs to give priority to brand promotion, so the pricing is relatively low

Electric forklifts are now very commonly used logistics and warehousing equipment

5T, 1

The vehicle runs ahead and the speed is controlled by the rotation angle of the direction speed control button

Finally, the fork is retracted and the loading platform falls back to the low position

Regardless of the price of the forklift, if the electric forklift has been working in a low temperature environment for a long time, it should be placed in a warm indoor environment for a period of time before charging it indoors

BYD ECB100 Warehouse forklifts Website

If the connecting rod bolt is tightened too much, it will be damaged, which will cause damage to the engine cylinder

Speed regulating device It operates normally at 24V voltage and the speed is adjusted by electronic control

At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards The wheel groove wear shall not be greater than 10% of the original size The neutralization position of the carbon brush has been adjusted on the test bench of the factory, and customers are not allowed to disassemble and adjust it at will The forks of a battery truck are usually raised to a height of 200 MM, which is just enough to lift the pallet off the ground and keep a distance from the ground, allowing for free movement

Under the general trend of "energy saving and environmental protection", specialization, automation, intelligence and new energy technologies have become major opportunities for the development of the forklift industry

During the unloading process, rapid descent and unloading are strictly prohibited; 12

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

The fork design combines European and American pallet standards

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible

Controlling the operating speed can control the magnitude of the travel motor force

BYD ECB100 Warehouse forklifts Website

, Hangcha Group Co

People usually have this idea that if the quality and after-sales service are good, the price of the forklift will generally be high, while the lower-priced electric transport trucks are often greatly discounted in quality

It does not mean that electric pallet trucks have the advantage of being easy to operate and can be directly operated after purchase

Therefore, it is very necessary to check and deal with these minor problems

(4) Turn the key switch to the off position

The vehicle uses intelligent rechargeable batteries to increase battery charging time

The material storage and retrieval action flow is completed

After the electric forklift starts, you need to drive the electric forklift to the front of the goods and enter the working position

An electric forklift is a dual-purpose electric forklift with loading and unloading functions and short-distance transportation functions

The electric transport truck manufacturer reminds that the forklift should be lowered to the lowest position and the power supply should be disconnected after the work is completed

It can be said that if you understand the parameter table of one electric forklift, you can understand all types of electric forklifts based on the data

? High-quality hydraulic pump station with buffer, low noise, small vibration, good sealing, smooth and reliable lifting and lowering

It plans to increase the promotion and publicity of such products in 2020 to accelerate market penetration

It integrates power, braking, differential, and load-bearing in one, and has speed, temperature and other sensor interfaces, which is more conducive to intelligent control

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info