亚洲骚,国产精品女教师久久二区二区,污18禁污色黄网站免费观看

BYD lithium battery transport forklift operation method -

This move also helped Anhui Heli achieve continuous improvement in the company's gross profit margin

The chassis is welded by profiles, so that the whole vehicle can realize turning, spinning and side shifting functions

in various factories and mines

Principles of forklift selection 1

Check whether the synchronous motor rotates flexibly and whether there is false friction

When the electric transport truck is not in use, put the forks away and store them in a designated location without affecting other operations

0 meters

Under the same battery capacity, the communication system will last longer; currently, most of the equipment used in logistics distribution centers, warehouses, workshops, etc

Different cold chain products have different requirements for cold storage temperature, which also determines the different grades of cold storage forklifts, as shown in Table 1 and Table 2

With the deepening of the new energy revolution, forklifts are in the process of switching from lead-acid batteries to lithium batteries and hydrogen fuel cells, from traditional to intelligent, and from extensive management to refined management

Improve operating efficiency fast charging mode, 1-3 hours fast charging mode is suitable for multi-shift operation

"Cobalt-free" and "low lithium content" achieve the environmental compatibility of the battery and greatly reduce the cost of waste disposal Therefore, when companies choose batteries for electric transport trucks, they should pay attention to checking the anti-counterfeiting mark of the product, whether the quality assurance card, maintenance card, etc

BYD lithium battery transport forklift operation method - Safety is the most important part of the equipment BYD forklifts are equipped with lithium iron phosphate batteries independently developed by the company, which has set off a green energy storm in the industry and become a representative company of new energy powered forklifts in the industry

The vehicle can be easily pushed under the base of the cargo box, and then the chassis is raised by hydraulics to lift the goods, and the goods can be dragged to move

BYD forklifts still perform well in cold chain logistics and have huge room for market expansion

When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

Prevent vehicles from carrying people; 7

The vehicle runs ahead and the speed is controlled by the rotation angle of the direction speed control button

When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating

Winter is the peak season for accidents, accounting for about 80% of the accidents throughout the year, and more than 65% of the accidents in winter are caused by operating errors

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle The whole vehicle structure is shown in Figure 2 The development of its industry is closely linked to the application and breakthrough of new technologies 3

Have the corresponding safety technical knowledge and skills for special equipment operators with forklift certificates; 6

BYD lithium battery transport forklift operation method -

Before continuing to operate, the direction selection switch must be restored to the middle position

Advantages: Manual trucks are pulled by hand and operated with handles, which is extremely simple, flexible, light in weight, energy-saving and environmentally friendly, and have excellent performance

After starting the electric transport truck normally, press the handle of the electric transport truck with both hands to between 90° and 180°

Generally, it is one year or 1,000 hours (whichever comes first)

Although the frame parts of the two forklifts are basically similar, diesel forklifts use engines and gearboxes as power sources, while battery forklifts use motors, gearboxes, batteries and controllers as basic power mechanisms

As for the preventive measures, they are not without them

In recent years, the constantly updated technology has emerged and has become a dark horse in the electric forklift industry

Continuous breakthroughs in key technologies For a long time, the core three-electric (electronic control, motor, battery) technology of electric forklifts has been an important factor that has troubled the development of electric forklifts in my country, especially the electronic control system, which is the core component of electric vehicles, has long been monopolized by foreign brands

The vehicle cannot be accelerated for a long time; 4

After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

It is an indispensable component in power and energy storage batteries

Finally, modular modeling is carried out through 3D software, and the rationality of the design is verified through prototype testing to ensure that the product has the advantages of narrow stacking channel, high storage efficiency, and high storage capacity rate

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info