欧美精品一二,国产在线精品视频,国产午夜福利在线播放

How to maintain BYD four-wheel electric forklift-

If the forklift is also treated as a cloud forklift, the handling volume of unmanned warehousing will increase exponentially

However, only superb technology is not enough

The common tonnage of electric pallet trucks is 1

Easy maintenance: The easier it is to operate and maintain, the less worry and more assured customers will feel

If there is no float, check whether the distilled water is level with the bottom of the distilled water bottle

※ The operating function is intact

, Ltd

Then tighten the brake mounting screws

Among them, for unmanned forklifts, there is a lack of products on the market that have the advantages of narrow stacking aisles, high storage efficiency and high storage capacity

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

When putting down the load, the mast can be tilted forward slightly to facilitate placing the load and pulling out the fork They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance The indoor use of the vehicle is very important If the lifting height of the fork does not reach the required height, add hydraulic oil

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

How to maintain BYD four-wheel electric forklift- If you still have questions, you can consult the electric transport truck manufacturer Good accessories can improve the performance of the entire product: 1

(2) Turn the key switch to the on position

The normal height is about 3 meters, and the high height is more than 10 meters (11) It is prohibited to turn on a ramp, and you should not drive across a ramp

Electric transport trucks are no exception

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

There are many unscrupulous merchants whose products will be completely scrapped after a short period of use

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward

The lifting device also relies on the motor to drive the hydraulic pump to push the hydraulic oil in the hydraulic cylinder to achieve lifting and lowering

The weight is gradually increased according to the load capacity of the prototype, and the lifting capacity and high-position side fork tests are performed under different loads

It is often used in ports, stations, airports, freight yards, warehouses, distribution centers and other places

The reduction in contacts can effectively reduce the maintenance cost of electronic components There is an emergency power-off button on the truck body, also called an emergency stop button, and on the handle are the fork lift button and the forward and backward knob

How to maintain BYD four-wheel electric forklift-

Check whether there is any fault in the drive motor system

A higher service life represents lower use costs, plus savings in maintenance staff salaries and raw material costs 1

Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery

Application environment: 1

Electricity meter When the key switch is in the on state, the power meter displays the remaining battery power, with a total of ten grids

The new generation of electric warehousing equipment such as electric forklifts, small electric stackers, and small electric transporters will have a strong impact on old forklift products such as internal combustion forklifts and manual forklifts

With the development of production technology, drivers no longer have to worry too much about the safety hazards caused by the quality problems of electric transport trucks, and it is also very easy to master the operation of transport trucks

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

The DC motor must be configured

When entering or leaving the work site or driving, pay attention to whether there are obstacles above

Hong Kong people like to call it a forklift, while Taiwanese people call it a stacker Types of forklift wheels: Forklifts are basically divided into drive wheels, load-bearing wheels, and auxiliary wheels

The mast or fork frame of a reach-forward electric forklift can move forward and backward

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info